Print
CS1W-LC001CS1W-P[][][]
CS1W-LCB[]1
View Full-Size Image

CS1W-LCB[]1

Product Code : CS1W-LCB[]1
Manufacturer : Omron
Price : Call for Pricing

Features

Down-Sizing

 

Cut cost, Save space, Reduce labor

 

PLCs provide the same functionality and performance as DCS while also providing the advanced features of PLCs: Open specs, easy maintenance, and cost performance. A wide range of Isolated-type Analog Units helps to save space and greatly reduces system costs.

Control system/ Logging system

 

Consolidate the functions of many controllers

 

Programming is as simple as combining the function blocks required by the application. To increase the number of controlled loops, just add them to the program. HMI windows can also be created easily using a wide range of utility software.

 

Simple programming

 

 

Easy Engineering

 

Engineering is simple when you can program with function blocks

 

Paste function blocks in a window just like you were creating a flow sheet, and then connect the blocks with the mouse to graphically program a wide range of process control. And with a PLC, it's easy to incorporate general-purpose HMI devices and
software (such as touch panels and SCADA software).

 

Simple Engineering

 

Advanced controller functions are built into the CS1 PLCs. No programming is
required for communications.

 

The Loop Control Boards and Units were designed for the CS1 PLCs and require no communications programming. High-speed, flexible data links can be created with the PLC to increase control performance.

 

No programming for communications

 

 

Control can be tuned as required

 

The CX-Process Tool software provides easy tuning. Both autotuning and fine tuning functions can be used to quickly adjust PID constants to the specific application. And function blocks can be set to a control cycle of as short as 10 ms for efficient control
of flowrates, pressures, and similar applications.

 

Easy tuning

 

 

Smart Products

 

Loop Control Boards (LCBs) and Loop Control Units (LCUs)

 

Packed with complete DCS functionality, the LCBs/LCUs are programmed with function blocks designed specifically for process control. By combining function blocks, a wide array of control methods, from basic PID control to cascade and feed-forward control can be easily configured.

 

Example: Cascade Control (Heating and Cooling)

 

 

Process I/O Units

 

These Analog I/O Units provide the functionality of isolators, power supplies, signal converters, and other devices. The built-in functions, such as measurement value alarms, rate-of-change calculations, and square roots, have enabled major savings in cost and space. High-resolution Models are also available. By combining the Units, logging/monitoring systems can be constructed, or the Units can be used together with LCBs/LCUs to construct complete process control systems. Parameters are set using Windows-based software that provides either tabular or conversational input
methods.

 

Process I/O Unit Configuration

 

 

SYSMAC CS1D-series Duplex PLCs

 

Increase the reliability of the facilities and devices with a Duplex PLC-based Process Control System

 

If an error occurs in the active CPU Unit, the standby CPU Unit takes over in an instant (using the hot standby method) so that system operation continues essentially unaffected. Other duplex variations are also possible. For example, instead of duplexing the CPU Unit, Power Supply Unit, and Controller Link Unit, a system can be constructed
with a Single- CPU Unit and only a duplex Power Supply Unit or only a duplex Controller Link Unit.

 

Duplex PLC, Communication Units and Power Supply Units provides high reliability.

 

A duplex system means rapid recovery for errors without stopping system
operation.

 

Replace Units with power supplied or even while the system is running, including CPU Units (Duplex-CPU system), Power Supply Units, Communications Units, Basic I/O Units, and Special I/O Units.

 

 

CX-Process

 

Increase the reliability of the facilities and devices with a Duplex PLC-based Process Control System

 

Paste function blocks in a window just like you were creating a flow sheet, and then
connect the blocks with the mouse to program graphically. A total of 70 different types of function block are provided for loop control, such as PID control, segment programming, and square roots.

 

Screen capture: Block connection diagram, ITEM lists, Sequence table.

 

 

CX-Process Monitor Plus

 

This Windows utility is used to download function block data from LCBs/LCUs and
to monitor the system with control windows (images of the on-site functions), trend windows, annunciator windows, and more.


By downloading CSV tag data created with CX-Process, window configurations can be easily produced by simply selecting the desired tags. User-created applications can also be started up by pressing the Start External Application button.

 

Screen capture: Overview window, Trend window

 

 

Face Plate Auto-Builder for NS

 

Engineering steps can be drastically reduced by combining an LCU/LCB with an
NS-series Programmable Terminal (PT).

  • Automatically Generate Control and Tuning Windows The software generates NS touch panel screen data from tag information created on the CX-Process Tool (tag names, tag comments, scaling, I/O allocations, etc.).

  • There is no need for troublesome communications address settings on the PT or ladder programming.

  • The generated data can be edited on the NS-Designer (NS screen creation software) as required.

System configuration for Face Plate Auto-Builder for NS

 

 

Application Examples

 

In-line Blending in a Food Plant, Batch Control in a Chemical Plant

 

Sterilization and Disinfection of Pharmaceuticals, Food and Beverages, Industrial Furnace.


Download Datasheet Here

Products Highlight

E-101
E-101
Y-112
Y-112
YEOMAN-119
YEOMAN-119
R-109
R-109
QUTEPC-1000
QUTEPC-1000
OT84NA
OT84NA